• Welcome

FAG FITTING-TOOL-ALU.RING10/30 Bearing

FAG FITTING-TOOL-ALU.RING10/30 Bearing , FAG .10 bearing , FAG FITTING-TOOL-ALU.RING10/30 Wholesale , FAG bearings Factor

Dimensional Specifications+

  • Bore type FAG Bearing
  • Cage material Steel
  • Precision class Class normal (P0)(P6)
  • Old Model FITTING-TOOL-ALU.RING10/30
  • Operating Temperature Range -40 to 250 ºF

Mechanical tools are designed for the mounting and dismounting of bearings. The mounting forces are transmitted by the geometrical locking effect. Cylindrical bearing seats. Smaller bearings can be driven cold onto the shaft or into the housing for normal tight fits. To prevent bearing damage, the fitting forces must always.30x. KTM-Sportmotorcycle AG particularly reserves the right to modify any equipment. Mattighofen only. constructions. technical specifications. which is not applied . BEARING BUSHING DOWN TANK-RETAINING PLATE R/S 08. TANK-RETAINING PLATE L/S 08. HH COLLAR SCREW M8X16 TX40 RIVET 3,2MM ALU 03.3BM1-30. 33.4. 1.3. 1.9. 4.6. 3. 1.5. 31.9. 1.4. 0.95. 2.9. 32. 1.26. 3BM1-32. 35.35. 1.3. 1.9. 4.6. 3.1. 1.6. 33.9. 1.4. 0.95. 2.9. 34. 1.339. 3BM1-34. 37.75. 1.3. 1.9. 4.6. 3.2. 1.6. 36.1. 1.4. 1.05. 3.2. 35. 1.378. 3BM1-35. 38.75. 1.3. 1.9. 4.6. 3.3. 1.6. 37.2. 1.4. 1.1. 3.3. 36. 1.417. 3BM1-36. 40. 1.3. 1.9. 4.6. 3.4. 1.7. 38.3. 1.4. 1.15. 3.5..installation later, and insert the jib traveler cars onto the beam. The pin should be on the NOTE: some models have alu- minum trampoline ring (10). Spinnaker Halyard. Run the spinnake r. h a l yard up the star- board side of the mast, through the spreader arm s, through the bale, around the cheek bl o ck on the mast,.