• Welcome

INA KTB30-PP-AS Bearing

INA KTB30-PP-AS Bearing , INA 30 bearing , INA KTB30-PP-AS enquiry , INA bearings dimensions

Dimensional Specifications+

  • Bore type INA Bearing
  • Cage material Steel
  • Precision class Class normal (P0)(P6)
  • Old Model KTB30-PP-AS
  • Operating Temperature Range -40 to 250 ºF

Hollow shafts WH30. hollow shafts. Accessories. Hollow shafts WH30, hollow shafts. d, 18 mm. Tolerance: +/-0,15. dLW, 30 mm. Tolerance h7: 0/-21 µm. Diameter tolerance h6 available by agreement. Lmax, 7100 mm. 1). The roundness corresponds to no more than half the diameter tolerance. 2). For shaft length < 500 mm.gear housing, or sometimes separately, in a specially-built housing on the line shaft. In these latter cases, the shaft size often requires using eight large-bore shoes instead of six standard shoes. Eight-shoe bearings are special, and are not listed here. We should be consulted. The two-shoe "adjustable" bearings often..KB16-P, INA, 2 ×, 16.00 x 26.00 x 36.00 mm, from 22.92 € . KB16-PP, INA, 40 ×, 16.00 x 26.00 x 36.00 mm, from 23.82 € . KB16-PP-AS, INA, 116 ×, 16.00 x 26.00 x 36.00 mm, from 26.08 € . KB16-PP-RR-AS, INA, 16 ×, 16.00 x 26.00 x 36.00 mm, from 33.21 € . KB20, INA, 13 ×, 20.00 x 32.00 x 45.00 mm, from 25.62 € ..Linear ball bearing and housing units KTB..-PP-AS. sealed, greased, with relubrication facility; corrosion-resistant design possible. Linear ball bearing and housing units KTB..-PP-AS, sealed,. Compressive load Tensile load Sealed on all sides Grease lubrication Oil lubrication. Fw. mm. H. mm. B. mm. L. mm. KTB12-PP-AS